Hydro dipping kit factory | BST
Manual hydro dipping tank
Automatic hydro dipping tank
Rinse tank
Spray booth
Drying oven
Drying line
Automatic painting line
Sqm factory
Skilled workers
Countries
Trusted clients
Automatic hydro dipping tank
Save labor cost,high efficiency (1 day 8 hours around 600sqm films)
X or X+Y Axis option
Auto flowing film, speed adjustable
Auto spraying activator, distance adjustable
Water cycle system & filter system & heating system
Programable controler, run steady and high percision orientation
7.5 inch PLC touch screen control panel, stainless steel chain and gear
Automatic tank with dipping arm
Size: 3.6*1.4*0.9m
Working size: 3*1.2*0.8m
Filter & Cycle & Heating system
201# stainless steel, 2.0mm thickness
Automatic flowing film & spraying activator & dipping
Inverted triangle automatic dipping tank
Triangle frame size: 3.4*0.3*1.22m
Dipping tank size: 10*1*0.9m
Flowing film header size: 1*0.8*0.4m
201# stainless steel, 2.0mm thickness
Automatic flowing film & spraying activator & dipping
Manul Hydro dipping tank
Sizes recommend:
1.6m*0.7m*0.9m (W*D*H)
2.0m*1.2m*0.9m (W*D*H)
2.4m*1.2m*0.9m (W*D*H)
201# or 304# stainless steel, 2.0mm +/-0.2 thickness.
Heating system & Filter system & Cycle system.
With 2 separated drain pipes,long & short dividers,move & fix design.
Only need to heat surface water, save time and cost.
Drying oven
Sizes recommend:
1.5m*1.0m*1.5m (W*D*H)
2.0m*1.3m*1.8m (W*D*H)
2.4m*1.3m*1.8m (W*D*H)
RKC digital screen control panel.
750w motor and 10.5 inch wind wheel.
Auto power off control when over setting temperature.
2 layers 100k 80mm thick silicic acid aluminum cotton.
201# 1.5mm SS inside, 1.2mm cold rolled sheet outside.
Drying line
Sizes recommend:
8*1.0*1.4m (W*D*H)
10*1.0*1.4m (W*D*H)
12*1.0*1.4m (W*D*H)
201# 1.5mm SS inside, 1.2mm cold rolled sheet outside
50mm 100kg rock wool insulatio, 0.5hp motor to transport wind
9.5 inch wind wheel, stainless steel belt & chain & gear
Ceramic heating tube, overheat protection, RKC control panel
Rinse tank
Sizes recommend:
3.0m*1.0m*1.4m (W*D*H)
6.0m*1.0m*1.4m (W*D*H)
10.0m*1.0m*1.4m (W*D*H)
Speed adjustable: 1 to 5m per minitue.
Cycle system, save water, 360 degree washing.
Window design,easy to clean and repair inside.
160mm stainless steel gear main drive, 1.5 inch PVC pipe.
201# stainless steel chain, 1.5mm stainless steel plate belt.
Cylinder telescopic rinse tank
Size: L2500*D1000*H1500mm
Usage space: L2200*D800*H500mm
Main body: SUS*201*1.5 stainless steel
Circulating water pump: 3HP
Nozzles: 90pcs
Cylinder controls lifting
Spray booth
Sizes recommend:
1.6m*1.8m*1.8m (W*D*H)
2.0m*1.8m*1.8m (W*D*H)
2.4m*1.8m*1.8m (W*D*H)
Cycle system, save water.
Healthy friendly for worker.
Leakage & overheat protection, auto start system.
Flowing guide system & filter system & spray system.
With 201# or 304# stainless steel, 2.0mm +/-0.2 thickness.
Recommend kit for new starters
Hydro dipping tank: 2.0*1.2*0.8m (L*W*H)
Rinse tank: 3.0*1.0*1.4m (L*W*H)
Drying oven: 1.8*1.2*1.8m (L*W*H)
Spray booth: 2.0*1.8*1.8m (L*W*H)
Hydrographic film: 500sqm
Activator: 30L (15L activator for 250sqm films)
20GP container inside size: 5.8*2.3*2.3m (L*W*H)
Hydro dipping process
1. Primer / Base coat: Spray booth
2. Drying: Drying oven
3. Dipping: Dipping tank
4. Washing: Rinse tank
5. Clear / Top coat: Spray booth
6. Drying: Drying oven
5 Axis Spray Painting Machine
X axis: Reciprocating accuracy 2mm, positioning accuracy 1mm
Y axis: Area within 600mm, reciprocating stroke more than 800mm
Z axis: Stroke within 350mm, spraying height <= 150mm
P axis: Positioning error <=1.5°, Travel: 0~270 degrees
W axis: Positioning error <=60″, Single-side load <=10KG
2 sets of spray guns, 9 operate models, program 90 areas
Automatic painting line
3m cyclone spray booth + Skywell plenum
95m ground rail line + Rail drying oven
Fixture + Electrostatic spray gun
Fresh air system for coating room
20000 Air volume cyclone tower
Activated carbon adsorption box
Traction fan + Electronic control system
Automatic constant temperature electric oven